Tips for Caring for and Replacing Car Radiator Water

to Avoid Overheating, Don't Be Late to Replace the Radiator on the Car. by Caring for and Replacing This Car Radiator Water, It Can Be Useful for You.

On the engine there is one engine component that needs special attention, namely the radiator. This section is the engine cooling system so that the engine is at a normal temperature when driving. Therefore it must be considered in caring for and replacing the car radiator water. Don't let it be neglected, as a result it can cause the engine to overheat and damage the radiator. There are many ways to treat and replace car radiator water. Here are the tips.

Caring for Radiator Water

Radiator Water Volume

The problem that occurs in cars is that the temperature of the car's engine increases dramatically, otherwise known as over heat. The reason could be due to the lack of water volume in the car radiator, which has an impact on the radiator cap. This will provide pressure to be channeled to the reservoir or water supply tube on the radiator. You don't need to panic when the water volume in the radiator decreases, because the safe limit for the water volume in the radiator is in a position in the middle of the full and low indicators. You should frequently check the water volume in the radiator regularly, so as not to overheat the engine.

Clean Radiator Tank

Always keep the radiator tube clean so that it is always clean. The best way is to drain or clean the car radiator tank regularly. This is important to avoid corrosion of metal components that flow through special holes in the cylinder head. You can do it at least once every 2 weeks, so that the engine temperature remains in a normal condition.

Don't Use Tap Water

Water that must be filled in the radiator tank, you should avoid tap water. Why is that? Because tap water has a high iron content and can have an impact on corroding the car radiator tank. The main function of radiator water is not only as engine coolant, but also to prevent rust in the radiator water lines. For that, you should avoid using tap water.

Use Radiator coolant

Use radiator coolant to keep the car radiator water cool. This water is specifically for maintaining the temperature of the car engine, which serves to lift dirt and rust that has accumulated in the radiator tank. But, also adjust the radiator coolant to the type of your car engine. The point is to prevent the occurrence of deposits, which can trigger blockages in the car radiator cells. You should ask several repair shops and dealers or car repair shops, for the radiator coolant that is suitable for your car.

Changing the Radiator Water

Dispose of Old Radiator

. Before starting to change the radiator water, make sure your car is off and the engine is cold. This is so that the radiator water is not hot and does not hurt your hands. Then, unscrew the radiator hole at the top and don't forget to unscrew the bolt on the radiator drain.

Fill Radiator Water

The next step is to replace the car radiator water, which is to fill in a special coolant for the radiator water. Radiator water can also be filled with plain water, but ordinary water sometimes causes scale on the car.

Starting the Car Engine

After the radiator water is filled, you can start the car engine. Then look at the engine temperature indicator on the car's speedometer, whether it is in the ideal line or not.

Reserve Tank Check

In changing the car radiator water, don't forget to check the spare water tank. Open the tank cap and drain the water until it runs out. Then fill it with clean water or coolant to the maximum required limit.