Get to Know the Function of a Manual Car Gear and How to Drive It

For those of you who want to learn to drive a car, you should know that there are two types of car transmissions, namely automatic transmission cars and manual transmission cars. Each type of transmission, manual vs. automatic car gear has its own advantages and disadvantages. Automatic cars will be very comfortable to drive on flat terrain such as on urban roads, while manual cars are tougher to rely on when traveling or used on roads with uphill, downhill terrain, or roads that are not so smooth and flat.

Many people think that when learning to drive a car for the first time, choose to learn to drive a car using a manual transmission car first. When you are proficient in driving a manual gear car, it will be easier for you to master how to drive an automatic car. This is because there are gears and clutches in manual cars that must be learned. Is it really like that? In this article, automotive tips will discuss fully the function of manual car gear (applies to Avanza or any car brand and type), and how to drive it. Hopefully useful, yes!

How to Drive Manual Car

For some people, driving a manual car is difficult and not as easy as driving an automatic car. This is because driving a manual car requires expertise in shifting gears, unlike driving an automatic car that is equipped with an automatic gear change system. However, for those of you who want to learn how to drive to shift gears manually, don't despair. Because, with practice and practice you can definitely drive a manual car. How to? Check out the tips below, come on.

1. Get to Know the Features of Manual Gear Cars

The first thing you can do to learn how to drive a manual car is to recognize the features in this transmission so you know the function and use of each feature in driving. The main and most important features for you to know and memorize its functions are the brake pedal, clutch pedal and gas pedal.

Don't step on the wrong pedal, especially since these three pedals are located side by side in the lower position near the feet. One step on the pedal will be very fatal. But don't worry, you can memorize it seriously and continue to practice and practice to get used to the pedals.

In addition, you also have to recognize the gear lever in the car's gear, starting from 1st to 5th gear. Each gear serves to change the speed of the vehicle, including the R feature. What does R mean in manual car gear? The meaning of R in manual car gear is a gear that serves to reverse. When you are just learning, of course you also need to find the best way to memorize manual car gear on your vehicle.

Not only knowing the pedals and manual gear positions, you also have to know the other features of a manual gear car, such as the sign light button, horn, door and window lock button, wiper setting button and so on. In addition, you also have to know the location of the gear and how to change the car's gear or car gear. Learn slowly, you will definitely be able to do it.

2. Set the Sitting Position as Comfortable as Possible

When learning to drive a car, the thing you need to pay attention to is a comfortable sitting position. This sitting position greatly affects the way you drive and step on all three pedals under your feet. Do not sit too forward or too far from the pedals because a sitting position that is too far away can make it difficult for you to step on the pedal and change pedal steps when driving. Meanwhile, when sitting too forward or close will make you quickly tired of driving. For that make sure to sit in the most comfortable position possible to make you comfortable and smooth driving.

3.recognize All Pedal Positions

It is important for you to recognize all the pedal positions on a manual car, don't step on the wrong pedal because it will be fatal. There are 3 pedals that you should know, namely the gas pedal, brake pedal and clutch pedal. Each pedal is located next to each other. The gas pedal is on the right, the brake pedal is in the middle and the clutch pedal is on the left.

Each pedal has its own function according to its name. The gas pedal serves to provide a speed boost to the car. the brake pedal is useful for controlling the car's speed and stopping the vehicle, while the clutch pedal is useful for breaking the wheel rotation and engine rotation between each gear, whether you add gears or reduce gears. So, you have to step on the clutch pedal every time you want to increase or decrease the car's transmission gear (shift manual car). This is done so as not to damage the gears on each of the car's gear transmissions.

4. Start the Car Slowly

Next it is important for you to know how to start a car engine. When you want to start a manual car engine, you have to make sure that the manual car gear lever is in neutral. This can be seen from the position of the car gear lever which is between third and fourth gear and the gear lever can be moved freely left and right.

After making sure that the gear lever is in the neutral position, you can start the car engine by still pressing the car's clutch pedal when the car is started. This is done to prevent the car from jumping forward if you forget that the gear is in neutral or not. When starting to drive, make sure the foot distance between the three pedals is not too far. At the beginning of learning to drive a manual car, you can focus your foot between the gas and the clutch. You have to keep practicing this skill every time you want to do a gear shift. Make sure to always step on the clutch pedal if you want to increase or decrease the car's transmission gear.

5. Run the Car, Make Sure to Be Careful

After the car is successfully started, then the next step is to run the car carefully. To run a car, the first thing you have to do is start learning to shift gears. In manual cars, the car's gear is divided into 5 levels, namely 1st gear, 2nd gear, 3rd gear, 4th gear and 5th gear. Make sure you apply the correct way of shifting the car's gear, yes.

The function of each manual car gear is to adjust the change in vehicle speed according to the terrain and speed you want to get. Mastering each level of manual car gear will be very useful for you when you learn how to drive a manual car on an incline.

To start the car, shift the car's gear lever to 1st gear by stepping on the clutch pedal, then shift the gear lever towards 1st gear (press the gearshift or gear lever towards the left side and then go up) then slowly release the clutch pedal. Then the car will start running with a 1st gear transmission. To increase the car's speed, you can start trying to step on the gas pedal slowly, don't step on it fully. Check the speed of the car on the speedometer. If you're just learning, make sure your speed doesn't exceed 20 km/h to keep the vehicle speed under control.

6. Shift Clutch to Higher Gear

After you are comfortable and start to master the running of the car in 1st gear, you can start to shift the clutch to a higher gear. The question that often arises is about moving or changing manual car gears at what RPM? Normally the gear shift is done when the engine RPM is at 2,500-3,000. The way to shift the clutch to a higher gear is almost the same as how you enter gear 1. You have to make sure that every time you want to shift your car you have to do it at the same time as pressing the clutch pedal. If you forget to step on the clutch pedal, the gear will not enter.

After you can shift car gears, then you will learn how to shift a good manual car smoothly so you don't feel the displacement. By knowing how to shift a manual car smoothly, it will affect the way you drive, which will also be smoother and smoother.

How about shifting gears to reverse on a manual car? First, you need to pay attention to the position of the neutral gear which must be in the middle. Then, put the gear into first gear by sliding the lever to the far left and pushing it forward, then into the reverse position.

7. How to Drive a Manual Car by Knowing How to Lower Gears

The next way to drive a manual car is to know how to lower gears. After knowing and fluent in raising gears, now you will learn how to lower gears in manual cars. How to lower the gear of this car is actually the same as how to raise the gear of a manual car. You must always press the clutch pedal fully at the same time as moving the gear lever to lower gears.

If you want to change gears but you forget to step on the clutch pedal, then the manual car gear will be hard and difficult to move. Regular practice will make your feet and hands accustomed to changing teeth. Of course, don't just shift the car's gear from between any gear, such as 3 to 1 or another. Also make sure you always apply how to shift this manual car gear correctly.

Gear Function 1, 2, 3, 4, 5 on Car

In the discussion above, we have discussed that the gears of manual cars and automatic cars are not the same. Actually, how many gears are there in the car? In manual cars, the car gear has 5 stages. This gear serves to regulate the speed and performance of the car's thrust. To learn manual cars you must know the function of each car gear. The following is an explanation and description of the function of each gear on a manual car.

1. 1st Gear Function on Manual Car

Gear 1 is the first gear you should use when driving a manual car. This gear is the starting gear when the car engine is started and run at the beginning. The use of this gear is only maximum at a speed of 20km/hour.

2. 2nd Gear Function on Manual Car

After using 1st gear, then next you have to shift gears to 2nd gear so that your car can continue to run and not stutter. The function of gear 2 on a manual car is to run the car engine at a speed of 15-35 km / h.

You may also be wondering, how many teeth do you use on the incline? The most effective way to go uphill is to put the manual car into 1st or 2nd gear. 1st gear can be used when the incline is really steep. Meanwhile, use 2nd gear for a fairly gentle incline.

3. 3rd Gear Function on Manual Car

You should know that the main function of each gear on a manual car is to adjust the speed of the vehicle. Gear 3 is a standard gear that is able to make your car run quite smoothly and is able to provide a strong enough boost on uneven roads, such as on uphill, downhill or bumpy roads.

4. 4 Gear Function on Manual Car

Gear 4 is the gear that you can use when driving on empty streets and want to drive the car at high speeds of around 50-80 km/hour. Gear 4 is very suitable for use when driving on highways or other quiet smooth roads.

Then, when to change or shift the manual car to the 4th gear position? How to shift a manual car that you have to adjust to the 4th gear position is when the manual car enters a speed of 50 km / h to 80 km / h.

5. 5th Gear Function on Manual Car

Gear 5 is the last gear on a manual car. This gear is the gear with the maximum speed that you can use when driving a manual car. By using the 5th gear, the car can go at speeds of more than 80 km / h.

Manual Car User Error

Beginners often make mistakes that make driving and driving not smooth. In addition, the mistakes that are often made also have an impact on the age of the car components.

But this is not a sin, you can actually learn from the mistakes you have made so that later you can drive better. The mistakes that are often made by manual car users, both for those who are just learning and those who are already experts. are as follows.

1. Stepping on the Clutch Halfway

The first and most common mistake manual car users make is stepping on the clutch halfway. This error will make your clutch quickly damaged. The clutch, which is the link between the engine and transmission, when stepped on halfway will make the clutch wear out quickly.

2. Manual Car User Error Hanging Foot on Clutch Pedal

The next mistake that is often made by manual car users is to hang your foot on the clutch pedal while driving. You need to know that the clutch pedal is very sensitive, so when driving, avoid hanging your feet on the clutch pedal so that the clutch doesn't wear out quickly.

3. the Habit of Leaning Your Hand on the Gear Lever

For those of you who use manual cars, you may unconsciously have or even often leaned your hand on the gear lever. It is generally done to rest hands when driving. This is not dangerous, but you should know that under the gear there is a mechanical system that can be damaged if the gear is pressed consistently.

4. Shifting Gears Backward While the Car Is Still Moving Forward

This one mistake is usually made by manual car gear users when they want to park the vehicle. Manual car users often shift gears backwards while the car is still moving forward. This of course also has an impact on the car's transmission which will make it quickly damaged and cause a rough sound to the car when the car's gear is pressed backwards while the car is still moving forward.

5. Using High Gear at Low Rpm

The last mistake that is often made by manual car users is to use a high gear when the RPM is low. Many people do this because they believe in the myth that using a high gear at low RPM can save fuel. In fact, this myth is not entirely true, in fact this can result in engine lugging or the car has to work harder to move the car.

That's a complete discussion of the function of manual car gear and how to drive it. Of course, after reading this article, you will understand a little more about how to drive a manual car better to avoid various risks. In addition to learning how to drive and the function of gears, you also need to know how to protect your car to avoid financial risks in the future. One way is to buy car insurance. Car insurance serves to protect and protect the car from various risks such as loss or accident.