How to Clean the Tile Joints Correctly?

Cleaning the joints of the tiles can be one of the great challenges we face when cleaning the home. Tiles from all types of installations always tend to accumulate dirt, mold and microorganisms.

So you do not have to spend hours scrubbing the joints of the kitchen tiles or the tiles of your bathroom, in article transkerja.com we will give you some tricks so that you can clean the joints of the tiles more easily, with products that you have in your home.

Remember that before you start cleaning the joints of the tiles, you must sweep the surface or pass a dry cloth to remove dust.

Follow these tricks to clean the tile joints and we guarantee that they will look like new:

1. Baking soda, an ally for cleaning kitchen and bathroom tiles
This mineral has hundreds of applications that help with household cleaning. Cleaning the tile joints with baking soda will help you remove dirt and adhering grease. In addition, with this element you will neutralize the bacteria.

To clean the bathroom and kitchen tiles, you must moisten the baking soda in hot water to create a thick paste. Then, you will cover the joints of the tiles with this paste and rub it with a brush.

After doing this, you will wait approximately half an hour, and you will remove the baking soda with a cloth.

2. Vinegar helps you clean tile joints
The white vinegar or apple is a highly popular product, because support for various cleaning tasks at home. It has anti fungal, antibacterial and bleaching properties, and helps neutralize the musty smell. Thanks to this, white or apple cider vinegar is an ideal product to clean the joints of the tiles.

If you do not have too much accumulated dirt, mix half a cup or 125 milliliters of white vinegar in ¼ cup or 62 ml of warm water. Once you have the mixture ready, sprinkle it on the joints of your tiles and let the preparation work for approximately 10 minutes. After this, rub with a brush or sponge and rinse with warm water and dry with a cloth.

To clean the joints of your tiles, you can also use apple cider vinegar. Unlike white vinegar, in this case you will use 125 milliliters of water and 125 milliliters of apple cider vinegar. Then you will apply the mixture on the joints with a brush and wait 5 minutes. Then you can clean with a cloth soaked in hot water.

In case there is a lot of dirt accumulation or the stain is very difficult to remove, do not dilute the vinegar in warm water. Apply it directly to the joints, let it act for a few minutes and rub hard until the stain disappears.

3. Water with bleach or ammonia works as a joint bleach
Lye and ammonia are products that help you clean, bleach and disinfect the area where you apply them. They are one of the best options when there is too much dirt accumulation, because they are stronger substances. However, for this same reason, these products should be used more carefully when cleaning to avoid accidents.

To start cleaning, you must mix 30 ml of bleach or ammonia in half a liter of warm water. Once you have mixed it, apply it with sponge or spray on the joints you want to clean with the preparation. You must leave the bleach or ammonia for 5 or 10 minutes. After this time, you can start scrubbing the joints with a brush and, when you see them unpolluted, you can rinse.

Keep in mind that you should never mix bleach and ammonia, as toxic fumes can be produced for your health. When you are going to use these products to clean, wear gloves and mask. Avoid applying these products if children are present.

4. Baking soda, liquid soap and bleaching vinegar
If you have too much accumulated dirt and want to clean the joints of the blackened tiles, we recommend that you mix half a cup or 100 grams of baking soda, a tablespoon of liquid soap and 62 milliliters or ¼ cup of hydrogen peroxide. With this mixture you can easily clean the stains of the joints of the tiles, remove mold and create a barrier against fungi that prefer humid environments such as the bathroom.

To clean the joints, you will have to spray the mixture on the joints you want to clean. Then, you will have to wait and let the preparation work for at least 10 minutes. Finally, you will brush the bathroom or kitchen tiles and rinse.

5. Clean the tile joints with lemon
This citrus helps remove fat and get rid of stains. Do not be afraid to use it if your tiles are colored, since this fruit will not make them fade. On the contrary, it will make them look like new.

To clean the joints of the tiles, you must squeeze the juice of a lemon. This can be diluted in water or applied directly. Once you have done this, you can start rubbing and you will notice how the dirt disappears. Finally, when you see that the tile joints are clean, you can rinse or clean the lemon juice with a dry cloth.

With these tricks, it will be much easier to clean the joints of your tiles. Remember that there are specific products to clean the tiles of the kitchen, bathroom or anywhere in your home.